LATHE TOS SN 40C

*Swing Over Bedways: 16″
*Swing Over Cross Slide: 8-3/4″
*Swing in Gap: Approx. 25″
*Distance Between Centers: 80″
*Spindle Bore Diameter: 2.125″
*Spindle Speeds, Low (12): 22.4 to 1000 RPM
*Spindle Speeds, High (12): 45 to 2000 RPM
*Inch Feeds (36): .002 to .195
*Metric Feeds (2): .189 and .242
*Inch Threading (33): 1 to 80
*Metric Threading (29): 0.5 to 40
*Leadscrew Diameter: 1-1/2″
*Tailstock Spindle Diameter: 2-3/4″
*Tailstock Spindle Travel: 5″
*Spindle Nose: D1-6 Camlock
*Electrical: 550V/3PH